WoodChux
Wood Turning
Man Cave & Office
NEW ITEM!!!
Smoking Pipes
.jpg)
What you will receive:
• 1 (one) One hitter pipe/pocket rocket kit. We have 90 degree kits as well as straight kits, either can come with a 2" tube or 2.75" tube. Select the size and style in the drop down menu. We also carry packs that have both styles include.
Items needed:
25/64" drill bit
Pen mandrel & saver
2 non stick bushings
Blank size: 5/8 blank slightly shorter then the tube.(2 1/8" for long tubes, 1 3/8" for short tubes)
Drill 25/64" hole.
Glue in tubes, using the 2 nuts on either end to hold it while glue cures.
Slide one non stick bushing onto your pen mandrel. Slide blank followed by second bushing.
Bring tailstock with mandrel saver against second bushing. Lock tailstock and turn wheel to apply light pressure and lock.
Turn to desired shape cutting the two ends to just above the nuts.
Sand and finish
Assembly:
Thread mouth piece onto one end.
Thread burning bowl onto the opposite end.
Enjoy
.jpg)
What you will receive:
• 1 (one) One hitter pipe/pocket rocket kit. We have 90 degree kits as well as straight kits, either can come with a 2" tube or 2.75" tube. Select the size and style in the drop down menu. We also carry packs that have both styles include.
Items needed:
25/64" drill bit
Pen mandrel & saver
2 non stick bushings
Blank size: 5/8 blank slightly shorter then the tube.(2 1/8" for long tubes, 1 3/8" for short tubes)
Cut blank to size.
Drill 25/64" hole.
Glue in tubes, using the 2 nuts on either end to hold it while glue cures.
Slide one non stick bushing onto your pen mandrel. Slide blank followed by second bushing.
Bring tailstock with mandrel saver against second bushing. Lock tailstock and turn wheel to apply light pressure and lock.
Turn to desired shape cutting the two ends to just above the nuts.
Sand and finish
Assembly:
Thread mouth piece onto one end.
Thread burning bowl onto the opposite end.
Enjoy
.
Pipe Mandrel
Use this mandrel with your 4-Jaw chuck. Tighten down jaws, thread on your blank, secure with live center.
$5.49
Non Stick Bushing
$4.50
.jpg)
.jpg)
This great looking cigar case features solid brass chrome plated components with a built-in punch cutter. Designed to fit up to a 52 gauge cigar, O-rings provide a airtight seal to maintain ambient humidity so your prized cigar stays fresher longer.
The razor sharp punch cutter located under the cap produces a clean 1/4" dia. by 1/8" deep hole. A knock-out rod automatically clears debris from the cutter when the cap is reinstalled. Brass tubes can be shortened to suit shorter cigars if desired. Pen mandrel and Cigar Case Bushings required for turning.
- Fits up to a 52 ring gauge cigar
Finished size: 1-1/8" dia. x up to 9"
Minimum blank size: 1-1/2" x 1-1/2" x 8"
Instructions
Project components (blank not included)
Pen Mandrel
Drill bit: 24.1mm (61/64") forstner
Drill bit extender
Cigar Case Bushings
3 piece Cigar Case Bushings for the case kits above.
Heavy Duty Bottle Opener Kit
Chrome
3/8"x16tpi threaded post
.
Adjustable O ring allows for 6 different whitetail sounds.
Requires:
3 1/2" blank
5/8" and 27/32" drill bits
Use with lanyard to the right.
Camo lanyard for the grunt call to the left.
Rare Earth Magnets
3/4"x.125" (1/8") N45 Grade Neodymium magnets are the strongest permanent magnets. Extremely strong magnets, use caution. Great addition to any shop. Glue them to a tool and stick it to your lathe. Glue them to the wall to hang your tools. Turn a small knob out of scrap exotics and you have a nice fridge magnet. See my free instructions here. Compare to $2 each at PSI.
Item # MAG75
Standard Keychain Kit (chrome only):
Uses:
7mm drill bit
Pen mandrel
7mm bushings
Chrome
Both the chrome and gold secret compartment key chains have a hidden storage. You can hid money, notes, or anything else you might want to hide.
Requires:
10mm drill bit
Minimum Blank Size: 1 x 2 9/16"
